ssdmeter find your next ssd
SSD from Hynix.
Specification
Information
Here is some basic information of this SSD in the following table, such as its model name and some identifier.
| ITEM | INFORMATION |
|---|---|
| Vendor ID | SK hynix (0x1c5c) |
| Device ID | 0x1527 |
| Controller Vendor ID | SK hynix (0x1c5c) |
| Controller Device ID | 0x1527 |
| Model Number | PC401 NVMe SK hynix 256GB |
| Firmware Revision | 80003E00 |
| PCIe Link | Gen3 x4 |
| L1 substates | Yes |
| NVMe Specification Version | 1.2 |
| LBA size (byte) | 512 |
| Capacity (GB) | 0 |
| Number of Namespaces | 1 |
| Maximum Data Transfer Size (KBytes) | 128 |
| Write Speed (MB/s, up to) | 610 |
| Read Speed (MB/s, up to) | 2500 |
| Host Memory Buffer Preferred Size (KBytes) | 0 |
| Host Memory Buffer Minimum Size (KBytes) | 0 |
| Write Speed (MB/s, HMB enabled, up to) | 740 |
| Read Speed (MB/s, HMB enabled, up to) | 2500 |
| page-tag-nand | 3D-TLC |
| page-tag-vendor | Hynix |
| page-tag-controller | Hynix |
| page-tag-form-factor | 2280 |
NVMe hosts and devices communicate commands and completions data in Submittion and Competion Queues. Queue is the most essential data structure defined by NVMe specification.
| INFORMATION | |
|---|---|
| Admin Queue Size | 128 |
| Maximum Queue Entries Supported | 512 |
| Number of Queues | 16 |
| Arbitration Mechanism Supported | Round Robin Arbitration |
Supported Commands
List basic device information.
| ADMIN COMMAND OPCODE | COMMAND NAME |
|---|---|
| 0x0 | Delete I/O Submission Queue |
| 0x1 | Create I/O Submission Queue |
| 0x2 | Get Log Page |
| 0x4 | Delete I/O Completion Queue |
| 0x5 | Create I/O Completion Queue |
| 0x6 | Identify |
| 0x8 | Abort |
| 0x9 | Set Features |
| 0xa | Get Features |
| 0xc | Asynchronous Event Request |
| 0x10 | Firmware Commit |
| 0x11 | Firmware Image Download |
| 0x80 | Format NVM |
| 0xcb | Vendor specific |
| 0xcc | Vendor specific |
| 0xf0 | Vendor specific |
| 0xf1 | Vendor specific |
| 0xf2 | Vendor specific |
List basic device information.
| IO COMMAND OPCODE | COMMAND NAME |
|---|---|
| 0x0 | Flush |
| 0x1 | Write |
| 0x2 | Read |
| 0x4 | Write Uncorrectable |
| 0x9 | Dataset Management |
Thermal
SSD is becoming faster, and then hotter. Fundementally, hot is bad to the data in NAND media, and so it is necessary to control and monitor temperature.
| ITEM | DATA |
|---|---|
| Number of Power States | 5 |
| Power State #0 | 6.00 W |
| Power State #1 | 3.80 W |
| Power State #2 | 2.40 W |
| Power State #3 | 0.07 W, non operational |
| Power State #4 | 0.01 W, non operational |
| Thermal Management Temperature 1 (°C) | -273 |
| Thermal Management Temperature 2 (°C) | -273 |
Health
SMART data before tests.
| HEALTH ITEM | DATA |
|---|---|
| Composite Temperature (°C) | 49 |
| Available Spare (%) | 100 |
| Percentage Used (%) | 0 |
| Data Units Read (LBA) | 1599014000 |
| Data Units Write (LBA) | 510650000 |
| Host Read Commands | 9001914 |
| Host Write Commands | 2644386 |
| Controller Busy Time (minutes) | 333 |
| Power On Hours (hours) | 35 |
| Power Cycles | 46 |
| Unsafe Shutdowns | 16 |
| Media and Data Integrity Errors | 0 |